Hx711 Proteus Library -

| HX711 Pin | Connects to | |-----------|--------------| | VCC | +5V | | GND | GND | | DT (DOUT) | Any digital pin (e.g., Arduino D3) | | SCK | Any digital pin (e.g., Arduino D2) | | E+ | Load cell red wire | | E- | Load cell black wire | | A+ | Load cell green wire | | A- | Load cell white wire |

: Mimics 24-bit resolution, providing highly accurate weight data for your virtual microcontroller. Gain Selection

Navigate to your Proteus installation library folder. Typically, this is located at: C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\Data\LIBRARY (Note: ProgramData is a hidden folder). Restart: Restart Proteus to refresh the component library.

, if you:

Comprehensive Guide to the HX711 Proteus Library for Weight Sensor Simulation

Do you need assistance with in your code? Share public link

C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\MODELS

void loop() // Print the weight in KG or units Serial.print("Reading: "); Serial.print(scale.get_units(), 1); Serial.println(" kg");

The HX711 is not detecting an input voltage difference, or the clock timing is completely out of sync.

Since Proteus does not include the HX711 module in its default components database, you must source it from third-party engineering communities.