Easily name channels, set frequencies (receive/transmit), and manage duplex offsets.
The Weierwei Vev-3288s Programming Software offers a range of features that make it an essential tool for two-way radio users. Some of the key features include:
Define properties for the three-color LCD backlight scheme.
Whether you are programming for or repeater use? If you have already purchased a programming cable ? Weierwei Vev-3288s Programming Software
Download and run the setup file for the Weierwei software or CHIRP.
The programming software is much more than a simple frequency editor. It provides access to nearly all of the radio's internal settings. The key features typically accessible through the software include:
The Weierwei VEV-3288S is a versatile handheld radio popular for its rugged build and extensive features Whether you are programming for or repeater use
Enable/disable VOX (Voice Activated Transmit), set squelch levels, adjust power levels (High/Low), and configure scan lists.
Choose the correct COM Port number you identified earlier in Device Manager.
| Category | Specification | | :--- | :--- | | | VHF: 136-174MHz; UHF: 400-470MHz (also 350-390MHz in some models) | | Number of Channels | 118 or 128 memory channels | | Output Power | VHF: 5W; UHF: 4W | | Channel Step | 5K, 10K, 6.25k, 12.5K, 25K | | Battery | 1200mAh Li-ion | | CTCSS/DCS | 50 groups / 104 groups | | Dimensions | 100 x 55.5 x 32 mm | | Weight | Approx. 225g with battery | The programming software is much more than a
A clear picture of the radio's hardware helps to understand the software's purpose:
: Opt for cables built with an authentic FTDI or Silicon Labs CP2102 chipset . Cheaper clone cables often use counterfeit Prolific PL2303 chips, which fail on modern Windows operating systems without manual driver rollbacks.
CHIRP is a popular, free, open-source tool that supports hundreds of radio models. If the VEV-3288S is not explicitly listed in CHIRP, it often communicates using the Linton LT-3288 or Puxing PX-777 profiles, as these radios share identical internal firmware architectures. Step-by-Step Installation and Setup Step 1: Install the Cable Drivers