Epson Adjustment Program L4260 ((link)) Jun 2026

In the menu, look for:

On the Epson L4260, you will know you need the adjustment program when:

: Clears the internal counter to 0% so the printer can resume operation. Print Head ID Replacement : Updates the ID when installing a new print head. Initialization

Interestingly, a segment of the "Adjustment Program" economy has gentrified. epson adjustment program l4260

Flashing lights indicating that the internal ink pads have reached the end of their service life.

Reset the counter only after you have cleaned up the mess. Otherwise, you are just postponing an ink flood.

If your printer’s red lights are blinking alternately and all operations have ground to a halt, you are dealing with a standard Epson safety lockout. This is not a hardware failure. It is a software-triggered pause designed to prevent waste ink from overflowing onto your desk. In the menu, look for: On the Epson

Ensure the Port is set to "Auto Selection" or select your printer from the drop-down menu. Click . 3. Resetting the Waste Ink Pad Click on "Particular Adjustment Mode" . Select "Waste ink pad counter" and click OK .

Instructions on .

Resetting the counter without physically cleaning or replacing the waste ink pads can eventually lead to ink leaking inside your printer. Proceed with caution. Flashing lights indicating that the internal ink pads

You click "Check" to confirm the counter is at 100%, then "Initialize" to clear it. Power Cycle:

Epson printers do not have physical sensors to measure how wet the felt pads actually are. Instead, the printer relies on an internal electronic counter (the Waste Ink Pad Counter). Every time an action deposits ink into the pads, the counter increases by a predetermined value.

If you have disassembled the L4260, removed the old ink-soaked pads, replaced them with fresh ones, or installed a waste ink tank kit, you must reset the counter. Otherwise, the printer remains locked.