Ivoclar Programat P100 Manual English [upd] Guide

Define the degrees per minute (e.g., 60°C/min). Final Temperature (T): Set the peak firing temperature.

Place the furnace on a stable, heat-resistant surface. Keep at least 20cm of clearance on all sides for ventilation. Power Connection: Plug the device into a grounded socket.

| Error Code | Description | Manual Reference | Solution | |------------|-------------|------------------|----------| | E-01 | Thermocouple open circuit | Sec. 8.2 | Check connection; replace TC | | E-07 | Vacuum not reaching setpoint | Sec. 8.5 | Inspect pump, hoses, or door seal | | E-12 | Heating rate too slow | Sec. 8.7 | Check heating elements for wear | | --- | Furnace does not start | Sec. 5.1 | Verify power switch and fuse | ivoclar programat p100 manual english

Available in 110–120V AC or 220–240V AC configurations (verify your specific unit's identification plate). Frequency: 50 / 60 Hz.

Features a numeric keypad for efficient and convenient data entry. Define the degrees per minute (e

Always follow the ceramic manufacturer’s recommended firing schedule—these vary by product and batch.

High-quality QTK heating muffle for homogeneous heat distribution. Keep at least 20cm of clearance on all sides for ventilation

Ensure the voltage corresponds to the specifications on the identification plate (100-240V).

Proper setup prevents premature component failure and ensures technician safety.