Erickhill Rt-100 User Manual Today

| Problem | Likely Cause | Fix | |---------|--------------|-----| | Thermostat screen blank | Tripped breaker or blown fuse | Check supply voltage | | Thermostat not heating | Setpoint below room temp | Raise target temperature | | Workstation wobbles | Base clamp loose | Re-tighten under the bench | | Timer relay not advancing | Wrong dip switch config | Power cycle and re-check SW1–SW5 | | Tool won’t lock in collar | Rubber bushing missing | Add the included adaptor sleeve |

Look at the three indicator lights (left, middle, right).

Erickhill RT-100 User Manual: The Ultimate Guide to EMF Detection erickhill rt-100 user manual

Changes temperature units and toggles between average and maximum value modes.

: A charging cord for the built-in rechargeable battery. | Problem | Likely Cause | Fix |

When the battery icon on the screen flashes empty, plug the device into a power source. Avoid utilizing the meter while it is plugged in and charging, as the power delivery cord will cause artificial spikes in the Electric Field reading. "Null" or Zero Readings Near Known Devices

Watch the numeric values update on the screen. The top reading typically represents the Electric Field (V/m), while the bottom reading represents the Magnetic Field (μT or mG). Toggling Measurement Modes When the battery icon on the screen flashes

The LCD screen shows:

3.7V lithium battery (rechargeable via USB-C or Micro-USB, depending on production batch) 2. Unboxing and Device Layout