must be installed on the Windows PC for the device to be recognized as a "Loader" or "MaskROM" device. USB Connection

Flashing firmware carries risks. Ensure you have completed the following preparation steps before launching the interface. 1. Download and Install Rockchip USB Drivers

Руководство по обновлению прошивки для Rockchip устройств

Select the corresponding .img or bin files from your extracted stock firmware package.

Ensure the target device has at least 50% battery capacity to prevent it from powering off mid-flash.

Click the button. The tool will flash the target partition blocks and issue a direct software reset command to boot your device. Method B: Factory Unbricking & Mass Storage Upgrades

: Allows users to write firmware images directly to the device's storage (NAND/eMMC). Dual-Mode Functionality Upgrade Firmware : Simplifies the process of installing a single update.img Download Image

Click on the empty paths next to the partitions you want to flash (e.g., parameter , boot , kernel , system ).

Click the “Run” button. The tool will write the selected images to the NAND flash. This may take a minute or two. Do not disconnect the device during the process.

RK Android Tool v1.35 Free Download: The Ultimate Rockchip Flashing Utility

The bottom of the tool window should show a green message such as “Found RKAndroid Loader Rock USB”. If it says “No devices found”, unplug the device, re‑enter loader mode, and try again. Sometimes toggling “USB Debugging” off and on can help.

: Easily write "Stock Firmware" or "Raw Firmware" to your device to restore it to factory settings.