Plug one end of a yellow Ethernet cable into any yellow port on the router. Plug the other end into your computer's LAN port. Alternatively, connect wirelessly using the default Wi-Fi name (SSID) and network key printed on the sticker underneath the gateway.
For the most stable setup, connect your computer to one of the yellow LAN ports using an Ethernet cable. 2. Accessing the Admin Dashboard Technicolor Td5336 Manual
Configuration WizardOnce logged in, the setup wizard will usually launch automatically. Select your ISP from the list or enter the PPPoE credentials provided by your service provider to establish the connection. Configuring Wi-Fi Settings Plug one end of a yellow Ethernet cable
You can enable “Smart Connect” (band steering) that automatically pushes devices to 5GHz. Find it under Wi‑Fi > Advanced Settings > Band Steering . Enable it, then set “Load balance” to prefer 5GHz. For the most stable setup, connect your computer
The default IP address is 192.168.1.1 , and the username and password are both admin .
If you are experiencing a weak Wi-Fi signal in certain areas of your home or frequent disconnections, your network may be suffering from interference or poor placement.
Select the configuration settings for either the or 5 GHz frequency bands.