and repeatedly tap the Del , F2 , or F10 key to open your motherboard’s BIOS/UEFI configuration menu.
By default, WoL magic packets only work on the . But what if you're on a beach in Bali and your PC is in a New York office? You'll need to set up Wake-on-WAN (WoL over the internet).
This is the good stuff. Follow these steps in order, and you'll be remotely waking your PC in no time.
: WoL is highly unstable over wireless networks. Use a wired Ethernet connection on the target machine for reliability. wake on lan anydesk hot
Your PC is cold. Powered down. Asleep.
Now for the moment of truth.
AnyDesk's implementation of Wake-on-LAN is a cost-effective and integrated solution compared to alternatives like smart plugs, and it's a standard feature included in all AnyDesk plans. and repeatedly tap the Del , F2 ,
Here's the magic behind it: When WoL is enabled on a device, its Network Interface Card (NIC) stays partially powered even while the system appears "off," quietly listening for a specific wake-up command. That command is a "Magic Packet"—a broadcast message containing the target device's unique MAC address, repeated sixteen times for good measure. When the NIC recognizes its own MAC address inside the packet, it signals the BIOS/UEFI to power up the machine.
Right-click your network card → → Advanced tab. Set Wake on Magic Packet to Enabled .
Wake-on-LAN (WoL) lets you power on a sleeping/off PC remotely by sending a magic packet to its network interface. AnyDesk can be used alongside WoL so you can remotely wake and then connect to a machine that wasn’t previously powered on. This guide covers prerequisites, BIOS/UEFI and OS configuration, router/network considerations, how to send WoL from within AnyDesk and other devices, troubleshooting, security considerations, and example commands. You'll need to set up Wake-on-WAN (WoL over the internet)
In today’s hybrid work environment, the need to access desktop computers remotely is essential. However, leaving computers running 24/7 wastes energy and increases hardware wear. This is where paired with AnyDesk's remote access solutions becomes a "hot" topic, providing the perfect balance of accessibility and efficiency .
Expand , right-click your Ethernet controller, and select Properties .
must maintain a physical power connection (even when off) and be connected via an Ethernet/LAN cable, as Wake-on-Wireless-LAN (WoWLAN) is historically unstable from a hard shutdown state.
Which of those do you want next?