Wedo Paket 50 User Manual ^hot^ [ UPDATED × Report ]

The Tare function allows you to weigh items inside a container without including the weight of the container itself.

Congratulations on purchasing the WeDo Paket 50, a comprehensive educational solution designed to introduce students to the world of robotics and programming. This user manual will guide you through the setup, assembly, and operation of the WeDo Paket 50, ensuring that you get the most out of this innovative learning tool.

is a professional-grade electronic parcel scale designed for high-capacity weighing in warehouses, post rooms, and industrial environments. With a robust build and versatile mounting options, it is a staple for businesses requiring precise shipment measurements up to 50 kg. Key Specifications

Tip: Start with a lower setting and increase if the seal is weak. If the bag melts or tears, reduce the setting. wedo paket 50 user manual

Press and hold the (or UNIT ) button, then simultaneously press the ON/OFF button.

The WEDO Paket 50 is a digital electronic scale designed for weighing post, parcels, and luggage.

Press the button again. The display will flash the required calibration weight value (e.g., 20.00 kg or 50.00 kg ). The Tare function allows you to weigh items

: Separate 12.0 cm x 11.5 cm wired control box featuring 23 mm tall high-contrast LCD digits.

1 x Wall mounting bracket for the display terminal (with screws) 1 x 9V Block battery 1 x AC Power adapter 1 x User instruction booklet 3. Initial Setup and Installation

Press the button. The screen will light up, cycle through a segment check (88888), and settle at 0.00 kg or 0.00 lb . Always turn the scale on before placing any items on the platform. Switching Weight Units is a professional-grade electronic parcel scale designed for

Plug the supplied mains power adaptor into the terminal base and a standard electrical outlet.

The display terminal connects to the platform via a flexible coil cable. Ensure the plug is firmly inserted into the port on the side of the platform. You can place the display on a desk or mount it to a wall using the included bracket. 3. Powering the Device

Plug the 6V adapter into the wall outlet and connect the other end to the power jack on the display unit.