To keep your X-Pro running for years, the manual outlines a strict maintenance log.
Configure print settings (speed, temperature, layer height) and click "Slice". Save: Save the generated G-code file to the USB drive.
| © QIDI Technology
Right-click your models to assign the left nozzle to one model and the right nozzle to another. Merge the models before slicing.
The X-Pro arrives nearly ready to use, though some critical assembly and removal of shipping materials are required. qidi x-pro manual
Slide a standard piece of A4 paper between the left nozzle and the heated bed.
Keep the original foam and box. They make transporting the printer much safer if you ever need to move it.
Repeat the process a second time to ensure adjustments to one knob did not alter the others. 4. Loading and Unloading Filament
: The X-Pro typically uses a 3-point manual leveling system. You should use a standard piece of A4 paper between the nozzle and the bed. It should feel slight resistance when pulled but should not tear [5.5]. To keep your X-Pro running for years, the
Grease the X, Y, Z rails and rods every few months. Troubleshooting Common Issues:
of the unboxing or leveling process mentioned in the manual?
“The QIDI X-Pro is a capable industrial-style printer, but it requires user discipline. Read the ‘First Print’ section twice before powering on.”
Insert the filament through the guide tube into the extruder. Push until you see plastic flowing from the nozzle. Select "Unload" in the filament menu. Once heated, the extruder will reverse the filament. Remove the old spool, load the new one, and select "Load". 5. Slicing and Printing (QIDI Print Software) | © QIDI Technology Right-click your models to
QIDI Link is a mobile app for managing your printer remotely.
While the manual provides a temperature chart, it is conservative. Based on community feedback and deep testing, here is the real-world data you need for the QIDI X-Pro:
If filament isn't extruding, heat the nozzle to 240°C and use the needle tool to clear the jam.
Adjust the thumb nut under the front-left corner of the bed until you feel a slight resistance/friction when moving the paper.