9.1.3 To 1.0.13.1 [work] — Upgrade Medianav
| Feature | MediaNav Evolution v1 (e.g., version 9.1.3) | MediaNav Evolution v2 (e.g., version 1.0.13.1) | | :--- | :--- | :--- | | | Windows CE | Linux | | Year Released | 2015 - mid 2018 | mid 2018 - onward | | Android Auto / CarPlay | No | Yes (built-in) | | Touchscreen Type | Resistive (requires pressure) | Capacitive (light touch, like a phone) | | Map Updates | Paid after initial period | Paid after initial period, but often with newer maps pre-installed | | Performance | Slower, noticeable lag in some operations | Much faster and more responsive |
Comprehensive Guide: Upgrading Medianav Evolution 9.1.3 to 1.0.13.1 (MN2 to MN3)
is designed for the newer Linux-based units that support features like Apple CarPlay Android Auto
Go to your car, ensure the radio is turned off, and start the engine.
To summarize, upgrading from MediaNav version 9.1.3 to 1.0.13.1 is . Instead, you have two distinct paths: upgrade medianav 9.1.3 to 1.0.13.1
You must go via an intermediate version (usually 8.0.5 or 2.0.2 depending on your hardware revision). Jumping directly from 9.1.3 to 1.0.13.1 will brick your unit. It turns into a paperweight. A sad, beige paperweight with a Renault logo on it.
This is the final official update for the second-generation hardware (Evolution 1), which runs on Windows CE 6 .
If CarPlay/Android Auto is your primary goal, consider a high-quality aftermarket Android head unit. These are often easier to install than sourcing a used OEM Linux unit and offer much higher screen resolution and app support. How to Check Your Current Version Turn on the MediaNav unit. Go to -> System . Select System Version to see your current firmware.
Many users seek to upgrade to the newer (often referred to as Media Nav Evolution 3 or MN3). This article explains the technical feasibility, the benefits of the upgrade, and how to approach this transition. Important Technical Note: Is It Possible? Yes, but it is not a standard update. | Feature | MediaNav Evolution v1 (e
The upgrade is finished when the system boots back into the standard home menu screen and the progress bar disappears. Step 5: Verify the Installation Once the home screen is accessible, navigate to . Select the System tab. Click on System Version . Verify that the displayed version now reads 1.0.13.1 .
Based on Linux and supports modern features like Android Auto and Apple CarPlay .
Insert the prepared USB flash drive into the MediaNav USB port. Turn on the MediaNav system.
With a bit of patience, your MediaNav Evolution will be transformed into a modern, connected multimedia system. Jumping directly from 9
Use plastic pry tools to unclip the decorative dashboard trim surrounding your current radio screen.
Version 9.1.3 is the final major official update for the Windows CE-based Evolution units. Version 1.0.13.1 is the starting point for the newer Linux-based "ULC4" units. How to Actually Get Version 1.0.13.1 (Hardware Swap)
While the hardware inside the dashboard remains the same, the Gen2 software (1.0.13.1) is better optimized for the MediaNav processor. This results in faster boot-up times and fewer system crashes or freezes.