Nitocote NT402 may affect the environment if released. Potential ecological effects include:
| Ingredient | CAS Number | Concentration (%) | | --- | --- | --- | | Epoxy Resin | 25068-38-6 | 30-40 | | Amine Hardener | | 10-20 | | Water | 7732-18-5 | 40-50 |
100% solids, zero Volatile Organic Compounds (VOC)
Nitocote NT402 may pose health and safety risks if not handled properly. The product contains chemical substances that can cause irritation, allergic reactions, or other adverse health effects. Potential hazards associated with Nitocote NT402 include:
Remove contaminated clothing and wash the skin thoroughly with soap and water. Do not use solvents for cleaning skin. nitocote nt402 msds
A , now more commonly known as a Safety Data Sheet (SDS) , is a critical document that communicates the hazards of a chemical product. It provides standardized information on a product's composition, potential health effects, first-aid measures, safe handling and storage practices, accidental release procedures, and regulatory requirements. An MSDS is an essential tool for employers and workers to assess risks and implement necessary safety measures in the workplace.
| Area of Protection | Required Measure | | :--- | :--- | | | If ventilation is inadequate, use a respirator with organic vapor cartridges. Use a dust mask during surface preparation (e.g., sanding or blasting). | | Hands | Wear chemical-resistant gloves (e.g., nitrile rubber). Avoid latex or cotton gloves. | | Eyes | Wear chemical splash goggles or a full-face shield. | | Skin/Body | Wear impervious protective clothing, such as coveralls made of Tyvek® or a similar material. Use barrier creams (e.g., Kerodex Antisolvent) for additional skin protection. | | Hygiene | Provide an emergency eyewash station and safety shower near the work area. |
| Property | Value / Requirement | |---|---| | Solids content | 100% | | Specific gravity | 1.35 g/cm³ at 23 °C | | Pot life (23 °C) | 25 min | | Tack‑free time (23 °C) | 2‑3 h | | Overcoating time (23 °C) | 6‑8 h | | Full cure (23 °C) | 4 days | | Adhesion strength | ≥2.0 N/mm² | | Water absorption (after immersion) | Nil | | Resistance to 10% HCl / 10% H₂SO₄ | Excellent / Very good | | Abrasion resistance | 0.22 g weight loss | | Bacterial / fungal growth resistance | Resistant | | CO₂ diffusion resistance | Resistant | | Sulphate ion penetration resistance | Resistant |
According to the Nitocote NT402 Product Data Sheet , the coating has the following properties: 100% (solvent-free). Specific Gravity: 1.35 g/cm³ at 23°C. Pot Life: 45 minutes at 23°C; 20 minutes at 35°C. Nitocote NT402 may affect the environment if released
I can provide the targeted details or application steps once you specify. Share public link
If the product is being applied in a confined space or in areas with inadequate ventilation, a respirator with an organic vapor cartridge is highly recommended.
The Nitocote NT402 MSDS typically includes the following sections:
In case of a fire involving Nitocote NT402, use: and proper environmental handling.
While Nitocote NT402 is formulated to be environmentally friendly and contains no coal tar or pitch, the liquid components are still combustible under extreme heat.
Because Nitocote NT402 is a chemical-based industrial coating, strict adherence to its —now more globally standardized as a Safety Data Sheet (SDS) —is mandatory. Understanding the MSDS for both the Base and Hardener components ensures worker safety, regulatory compliance, and proper environmental handling. A Breakdown of Nitocote NT402 Components
Nitocote NT402 is subject to regulations for transportation: