Enter the shelf-life duration in days (e.g., 3 for fresh meat) and press .
A: Press UNIT to cycle units during operation. The scale will remember the last unit after power-off on most firmware versions.
Stainless steel surface. Must remain clear during boot-up.
Replace the label or receipt roll. Clean the paper sensor eye with compressed air. Incorrect sensor alignment or wrong label size format. digi sm500 scale user manual
Enter the desired (e.g., 101 ) using the numeric keypad and press the PLU key.
Bright dot-matrix LCD or optional touch screen for operators and customers.
Use the alphanumeric keyboard layout to type the product name. Press [PLU] to save and move forward. Enter the shelf-life duration in days (e
| Part | Typical source | |------|----------------| | Pan | Digi authorized dealer | | AC adapter (9V 500mA center positive) | Electronics store (universal) | | Calibration weight 500g F1 | Amazon, scales supplier | | Carrying case | Generic padded case |
Remove the empty plastic core from the supply spindle and the waste paper backing from the rewind spool.
If you need help resolving a specific issue with your DIGI SM-500 scale, please share , describe what the printer or platter is doing , or Share public link Stainless steel surface
While this guide covers the essentials, the official DIGI SM500 MK4 user manual and service manual contain more detail, including wiring diagrams, advanced programming, and complete error code lists.
The scale will prompt for the required calibration weight (e.g., 15.000 kg ).
Verify the RJ45 link light is active. Check IP configuration in S Mode.