Ivoclar Programat P90 Manual [verified] (RECENT GUIDE)

Used to input program numbers and parameter values.

is a classic, robust ceramic furnace that debuted in 1987, notable for being the first in the Programat line to feature a for easy cleaning and operation . Although it has been superseded by newer models like the P310, P510, and P710, many dental laboratories continue to use the for its reliability in glazing and firing ceramics. Core Specifications and Components

The official Ivoclar Programat P90 manual (typically available as a printed document and a PDF from Ivoclar’s website) is structured to guide the user from unboxing to advanced troubleshooting. Its main sections generally include:

Understanding the Ivoclar Programat P90 manual is the key to unlocking the full potential of this furnace. The manual provides all the instructions needed for installation, safe operation, cleaning, calibration, and advanced programming.

The Programat P90 is designed for firing dental ceramic materials. It features a compact design, a user-friendly keypad interface, and precise temperature control. Key Specifications 110–120V / 220–240V (50/60 Hz) Maximum Firing Temperature: 1200°C Heating Chamber: High-quality quartz tube design Ivoclar Programat P90 Manual

A: The Programat P90 can store up to 90 programs, including standard Ivoclar programs and free programs for individual settings.

Place the furnace on a flat, level, and heat-resistant surface.

Regularly check the oil level (if applicable) and connections of your vacuum pump to ensure consistent pressure.

Over time, silver and alloy vapors from metal-ceramic firings can contaminate the muffle. Run a decontamination or purge cycle at 1000°C using an active charcoal or decontamination kit recommended for dental furnaces. 6. Troubleshooting Common Issues Potential Cause Recommended Solution Furnace does not turn on No power supply; Blown fuse. Used to input program numbers and parameter values

The membrane-sealed keypad should be wiped with a damp cloth; avoid harsh cleaners.

Features a high-quality QTK heating element that provides even thermal radiation across the firing tray.

Ideal for low-fusing and high-fusing dental ceramic systems. 2. Installation and Initial Setup

Ensure your laboratory outlet matches the voltage specified on the rating plate (typically 110-120V or 220-240V). The Programat P90 is designed for firing dental

Avoid placement near air conditioners, open windows, or high-traffic drafts. Power Connections

The Ivoclar Vivadent Programat P90 is a historic and respected ceramic furnace that first entered the dental market in 1987. It is known as the first Programat furnace to feature a , a design that offered superior protection against dust and contamination compared to previous models. Despite newer models with color touch screens being available today, the P90 remains in use in many labs due to its rugged reliability, precision, and ease of use.

Tighten all vacuum hose clamps. Clean the rubber gasket on the furnace head. Inspect the oil or diaphragm of the vacuum pump. Closing time (S) too fast; Cooling rate too rapid.