Lock the gear shaft using the included hex wrench/pin inserted into the matching alignment hole.

Pull the starter rope rapidly again until the engine starts and runs continuously.

Never refuel while the engine is running or hot. Allow the engine to cool for at least 2 minutes. Always refuel in a well-ventilated area, away from open flames, and wipe up any spills before starting.

Move the choke lever on the side of the air filter housing upward to the "CLOSE" / "CHOKE" position.

Never operate the machine without safety goggles, ear protection, heavy-duty work gloves, steel-toed boots, and snug-fitting long pants.

Mix fresh AI-92 petrol with quality 2-stroke oil in the provided dispenser. Do not use 4-stroke or water-cooled engine oil.