Airbot Hypersonic Pro Manual Online

Slide the battery pack into the base of the handle until it locks firmly into place. Wall Mount Installation

To clean stairs, upholstery, or cars, remove the extension wand by pressing the release button on the main body.

: Uses infrared sensors to detect debris and automatically boosts motor speed as needed.

: Ensure all components are present, including the vacuum handle motor, wind pipe, motorized floor brush, crevice nozzle, and charging adapter. airbot hypersonic pro manual

This appliance is intended strictly for dry, indoor domestic use. Do not use outdoors or on wet surfaces.

This often indicates the filters were put back while still damp. Remove and clean the filters and allow the unit to air out. Safety Precautions Do not use the vacuum to pick up liquids or wet debris. Avoid vacuuming hot ashes, glass shards, or sharp objects.

To maintain hypersonic suction:

Only use the original Airbot charging adapter to prevent battery degradation or fire risks.

A brush and wide nozzle attachment for furniture, keyboards, and dust extraction.

Do not use the vacuum to pick up liquids, lit cigarette butts, or hot ashes. Slide the battery pack into the base of

Inspect the extension wand, floor brush joint, and inlet nozzle for stuck debris. Clear obstructions using a long stick. The Roller Brush Has Stopped Spinning

Uses built-in infrared sensors to automatically adjust suction power based on the volume of dust detected.

Allow the HEPA filter to air-dry completely for at least 24 hours before reassembling. Putting a damp filter back into the vacuum can damage the motor and cause mildew odors. Cleaning the Roller Brush Flip the motorized brush head over. : Ensure all components are present, including the

Features green laser technology to illuminate microscopic dust on hard floors.

The is a versatile 3-in-1 cordless stick vacuum designed to handle everything from deep-pile carpets to delicate hard floors with its 27,000Pa suction power. This manual-style guide covers everything from initial assembly to advanced maintenance and troubleshooting. 1. Technical Specifications Specification Max Suction Power Operating Time Up to 45 mins (Eco/Energy Saving), 10–18 mins (Boost) Charging Time Approximately 4 hours Dust Cup Capacity 0.8 Liters Weight Handle: 1.1 kg; Total: ~3.5 kg Filtration Multi-stage cyclonic with E13 HEPA (99.97% efficiency) Motor 250W Brushless 2. Setup and Assembly