Hanmatek Dos1102 Manual -
Unplug any external USB devices, power down the unit, wait 10 seconds, and turn it back on.
is a popular 110 MHz budget-friendly digital storage oscilloscope favored for its balance of performance and accessibility for beginners. Below is a structured overview of the essential information typically found in its user documentation and professional guides. 1. Key Technical Specifications Authoritative guides from Hanmatek list the core capabilities of the as follows:
: Moves the waveform left and right to look at different parts of the signal history. Trigger Controls
Opens options for trigger type (Edge, Video), source (CH1, CH2, Ext), and slope (Rising, Falling). hanmatek dos1102 manual
Sets the voltage point that the signal must cross to trigger the display sweep.
The Hanmatek DOS1102 features dozens of automatic parametric measurements so you do not have to count grid squares manually. Press the button on the top panel. Select the source channel (CH1 or CH2).
Go to the Channel menu and toggle Invert to OFF. If you have a specific question about: Probe Compensation steps FFT Analysis setup USB Data Export instructions Share public link Unplug any external USB devices, power down the
Understanding the device's limits is critical for accurate measurement.
Before plugging in your device, ensure you have all the necessary components and perform a basic hardware check. What is in the Box Hanmatek DOS1102 Oscilloscope [1] Two 100 MHz passive probes (with adjustment tools) Power cord USB interface cable Quick-start guide Initial Power-On Test Connect the power cord to the back of the unit. Plug it into a standard AC outlet. Press the button on the top-left corner.
Before plugging in your oscilloscope, it is important to understand its core hardware limitations and capabilities. Operating the device within these boundaries ensures safe and accurate measurements. 110 MHz Channels: 2 Channels Sets the voltage point that the signal must
) to fully understand features like FFT analysis or PC software communication. Software Setup
The Hanmatek DOS1102 can automatically calculate over 30 mathematical properties of a waveform simultaneously. How to Enable Automatic Measurements: Press the menu button. Select your source channel (CH1 or CH2). Choose the measurement type you wish to display:
The Ultimate Hanmatek DOS1102 Manual & User Guide The Hanmatek DOS1102 is a highly popular, budget-friendly digital storage oscilloscope. It offers entry-level users, hobbyists, and students an affordable way to visualize signals up to 110 MHz. While the physical device packs impressive hardware for its price point, the factory paper manual can sometimes feel brief or difficult to navigate.