Motherboard Specs !full! | Hp Fxn1 E93839

Uses standard Intel LGA 1155 mounting holes, but the fan headers may require an adapter for standard 4-pin PWM fans. Verdict: Is it still useful?

is a proprietary motherboard used across several generations of HP commercial desktops, such as the and Compaq Elite series. Because HP uses "E93839" as a general regulatory or factory part number, specifications vary significantly depending on the specific PC model it was pulled from.

Limited by the SFF case and proprietary power connectors. It typically uses a 240W power supply, meaning only low-power, low-profile graphics cards (like the GT 730 or GT 1030) are recommended. HP Support Community Pros & Cons

The two factors that will most extend its useful life are:

The rear I/O is tailored for office environments, featuring a mix of modern and legacy connections. 6x USB 2.0 ports. Video: 1x VGA, 1x DisplayPort. Networking: 1x RJ-45 Ethernet port. PS/2: 2 ports (Keyboard and Mouse). Audio: Line-in and Line-out (3.5mm jacks). hp fxn1 e93839 motherboard specs

SATA II (3.0 Gbps) ports meant for Optical Drives (DVD/CD).

Multiple SATA ports, including 6Gb/s (SATA III) and 3Gb/s (SATA II) ports for fast SSD storage.

series. It is designed for reliability in professional environments, offering a modified ATX form factor that fits specific HP chassis. Key Specifications

If you are planning to purchase this motherboard for a custom PC build or use it as a replacement part, you must be aware of its proprietary design limitations. 1. Proprietary Power Connectors Uses standard Intel LGA 1155 mounting holes, but

Unlike standard consumer motherboards that use a 24-pin ATX power connector, the HP FXN1 E93839 utilizes a alongside a standard 4-pin 12V CPU power connector.

Used for dedicated graphics cards.

To give you the most accurate details for your specific setup, could you tell me: Are you looking to or RAM ? Do you need to know if a specific graphics card will fit?

Intel Core i7-2600, i5-2400, i7-3770, i5-3470. TDP Limit: Generally capped at 65W to 95W processors. Intel LGA 1150 Variant Because HP uses "E93839" as a general regulatory

The HP E93839 FXN1 Go to product viewer dialog for this item.

2 or 4 DIMM slots (configuration depends on the exact HP chassis revision)

This board uses HP's proprietary power connectors, not the standard 24-pin ATX connector found in custom builds.

Proprietary (designed specifically for HP chassis like the HP 8200 Elite). Memory: Type: DDR3 SDRAM. Slots: 4 DIMM slots.

Approximately 9.6 x 9.6 inches (24.4 x 24.4 cm).