G Star Iv Gps Driver Download Bu-353s4 Windows 11 [repack] -

Sometimes the BU-353S4 arrives in "SiRF Binary" mode. To force NMEA for Windows apps:

Click .

If you own a GPS receiver (often referred to as “G Star IV” due to its SiRF Star IV chipset), you need the correct driver to make it work on Windows 11 . While Windows 11 includes basic support for many USB GPS devices, the BU-353S4 works best with the proper prolific USB-to-serial driver . G Star Iv Gps Driver Download Bu-353s4 Windows 11

You can use free software to verify the GPS is sending data:

To test the data stream, download the (GPSInfo.exe). Open the tool, select your assigned COM port, set the Baud Rate to 4800 , and click Connect . You should see NMEA data sentences scrolling rapidly across the screen. Step 5: Prevent Windows 11 from Overwriting the Driver Sometimes the BU-353S4 arrives in "SiRF Binary" mode

The G-Star IV BU-353S4 relies internally on a Prolific PL2303 TA (or similar) USB-to-Serial bridge chip.

provides the latest Prolific drivers and the "GPS Info" test utility. Prolific Technology : For the most recent chipset-specific updates, visit the Prolific PL2303 Driver Page (use "guest" for both username and password if prompted). Alternative Mirror : A tested driver version is also hosted by While Windows 11 includes basic support for many

Once the driver package is installed on your system, you must manually assign it to your USB GPS hardware.

To make this work on Windows 11, you must prevent Windows from automatically overwriting the correct driver.