I2c Hid Device Driver Updated Download Windows 10 Hp Jun 2026
In an HP Windows 10 laptop, the I2C HID Device driver allows the operating system to communicate with precision touchpads (Microsoft Precision Touchpad standard) and touchscreens via the I2C bus. Unlike older PS/2 or USB devices, I2C is faster, uses fewer pins, and consumes less power—making it ideal for modern ultrabooks.
When this driver fails, Windows Device Manager usually displays a yellow exclamation mark next to the device, often accompanied by or Code 43 (Windows has stopped this device because it has reported problems) .
Upon reboot, Windows 10 will automatically detect the hardware and reinstall a clean copy of the driver. Troubleshooting Common Code Errors I2c Hid Device Driver Download Windows 10 Hp
You can find Intel Serial IO drivers on the HP support website for your specific model or through the HP Support Assistant. These drivers are typically found under the "Chipset" category.
The I2C HID (Inter-Integrated Circuit Human Interface Device) driver is critical for HP laptops, as it enables communication between the system and input devices like touchpads, touchscreens, and sensors. Problems with this driver frequently manifest as the "Code 10" error ("This device cannot start"), leading to a completely unresponsive touchpad. In an HP Windows 10 laptop, the I2C
Right-click on . (Note: If it has an issue, it may display a yellow exclamation mark). Select Update driver .
This method is particularly effective for HP laptops that shipped with Windows 10 version 1809 or newer. Upon reboot, Windows 10 will automatically detect the
Windows sometimes disables the I2C device to save power, which can lead to a "Code 10" error where the device cannot start. I2C HID error code 10 - HP Support Community - 9498353 29 Sept 2025 —
Sometimes the driver is fine, but Windows is turning it off to save power, causing it to fail. Device Manager , right-click I2C HID Device and select Properties Power Management the box that says: "Allow the computer to turn off this device to save power" and restart your computer. 4. Reinstall the I2C Controller
: Right-click I2C HID Device in Device Manager, click Uninstall Device , and restart. Windows will clean-install the hardware automatically upon boot.
Click .
