Keyence Lv N11n User Manual - Pdf Verified

The LV-N11N comes with a 4-core cable. Connect the leads according to this verified pinout: Power Supply (+24 VDC) Blue: Power Supply (0 V / GND) Black: Control Output 1 (NPN Open Collector)

The amplifier cannot detect a valid laser sensor head connection, or the laser head internal cable is severed. Turn off power, detach the sensor head connector, re-seat it firmly, and power the unit back up.

Click on the product page for .

: Press the [PRESET] button to normalize the light intensity display to "100" or "0," allowing the sensor to automatically compensate for dust or debris. Technical Specifications Specification Model Type Main unit, Cable-type Output Type 2-output, NPN open collector Response Time 80 µs (High Speed) to 16 ms (Mega) Power Supply 10 to 30 VDC I/O 1 External input, 2 Control outputs

Before wiring or programming the unit, verify that your system architecture matches the electrical and environmental tolerances of the LV-N11N. Specification NPN open collector 100 mA max (40 VDC max) Power Voltage 24 VDC (Ripple P-P 10% max, Class 2) Current Consumption 850 mW or less (at 24V, max current 35 mA) Response Time keyence lv n11n user manual pdf verified

Use this mode when detecting microscopic objects, transparent films, or when using retro-reflective setups where the target object blocks very little light. Remove the target object so the laser hits the background. Press and hold the button for three seconds or longer.

When searching for the manual, it's vital to ensure you're using verified and authentic resources to prevent damaging the unit. Follow these guidelines: The LV-N11N comes with a 4-core cable

250 µS. The factory default mode balancing speed and stability. TURBO: 1 ms. High power mode for dusty environments.