Drembo M6 Mixer User Manual Portable

: Combo jacks supporting XLR microphones or 6.35mm (1/4") TS instrument lines.

Launch your Digital Audio Workstation (DAW) or streaming software (like OBS Studio) and assign the master input to the mixer. macOS Configuration Connect the mixer to an available USB port. Navigate to > Utilities > Audio MIDI Setup .

: Use the rear selector switch to choose between standard DC power or PC data/power mode.

Adjusts frequencies. High shapes vocal clarity or brightness; Low cuts out low-end rumbling or adds warmth to the voice. drembo m6 mixer user manual portable

Open properties, go to the tab, and select 2-channel, 16-bit, 44100 Hz (CD Quality) .

The Drembo M6 appears as a standard audio input device to your computer via USB. To record or stream:

Using the USB-C cable, plug the mixer into a 5V/2A USB port (laptop, power bank, or wall adapter). The LED indicator on the handle will blink red during charging and turn solid green when fully charged (approx. 3 hours). : Combo jacks supporting XLR microphones or 6

(keyboard, drum machine, media player): Connect to a 1/4" line input, follow the same steps, but set the gain lower since line‑level signals are much stronger than microphone signals.

Understanding your hardware limits ensures optimal performance and prevents signal distortion.

Lower the or Treble knobs slightly to reduce high-frequency hiss. The streaming audience cannot hear the background music Navigate to > Utilities > Audio MIDI Setup

: Connects directly to a PC for recording or playback via a standard USB cable.

Check the power source. If the motor is hot, it may have tripped the thermal overload protection. Let it cool for 15-20 minutes.

While the Drembo M6 is primarily an audio mixer, some users confuse it with a sharing similar model numbers. If you’re using an audio mixer , vibration should be negligible. If you’re using a kitchen mixer named Drembo M6, ensure the mixing bowl is properly seated and the load is not unbalanced.