Sumitomo F50 Compressor — Manual New

Verify static helium pressure is within the specified ambient temperature range (typically 2.0 to 2.2 MPa).

According to the Sumitomo F-50 technical manual , proper setup is vital for system longevity:

: High-pressure gas is cooled via a water-cooled heat exchanger and then passed through an oil separator

: Focuses on component functions such as gas supply connectors and the adsorber. Key Specifications & Performance : 6.5–7.2 kW at 50 Hz; 7.5–8.3 kW at 60 Hz. Cooling Requirements sumitomo f50 compressor manual new

Hardwire the unit to a dedicated three-phase circuit breaker. Check phase rotation carefully; reverse rotation can permanently damage the internal scroll capsule.

Ensure a stable power line with a minimum capacity of 9 kVA (12 kVA recommended). Warning: Never use a power inverter as the main electrical supply source.

The sequence involves activating the control panel, monitoring the unloaded start, and verifying load-bearing operation. Verify static helium pressure is within the specified

Initial oil change and filter check (crucial for breaking in a new machine).

As a core component of GE Healthcare MRI systems, the F50 compressor falls under their service umbrella. The official GE Healthcare Service Documents portal is the most direct way to obtain the manual, but it requires credentials:

Listen for a smooth, consistent humming sound. The operating pressure gauge should instantly rise (high pressure side) while the return line drops to its dynamic equilibrium state. 5. Maintenance Schedule and Adherence Cooling Requirements Hardwire the unit to a dedicated

Verify cooling water is flowing at the correct rate and temperature. Confirm helium gas pressures are within static limits.

Standard supply and return gas Aeroquip connectors that safely pair with stainless steel flexible lines. Step-by-Step Installation & Commissioning

The Sumitomo F50 helium compressor is a cornerstone of cryogenic cooling systems, widely utilized to power Gifford-McMahon (GM) cryocoolers and cryopumps. Whether you are setting up a new laboratory interface, maintaining semiconductor manufacturing equipment, or operating a high-vacuum system, understanding the F50 compressor is vital for operational longevity.

Place the unit in a well-ventilated, dust-free indoor environment.

High-pressure, high-temperature gas is cooled by a water-cooled heat exchanger. Purification: An oil separator and an