Rm-0145 Manual Official

Press and hold the SET and POWER buttons simultaneously until the indicator light stays on.

Find the three-digit code for your TV brand in the included instruction booklet. Press and hold simultaneously until the indicator light stays on.

Must remain unobstructed to send and receive commands from target appliances.

Locate the DIP switch block (SW1 – 8 positions). rm-0145 manual

The LED light will flash four times, indicating the remote is now locked. To unlock, repeat the same process. Troubleshooting

Check that the power adapter is firmly seated in the wall outlet and the rear port of the unit.

| Error Symptom | Likely Cause (per manual) | Solution | | :--- | :--- | :--- | | | Reverse polarity on J1 | Swap Pin 1 and 2 wiring. | | Relay chattering | Insufficient power supply current | Upgrade to 1A minimum supply. | | Modbus timeout | Wrong baud rate or missing terminator | Verify DIP switches; enable termination on last device. | | Overheating | Inductive load without snubber | Add a 0.1µF capacitor across relay contacts. | | Erratic inputs | Floating digital input | Connect unused inputs to GND via 10k resistor. | Press and hold the SET and POWER buttons

is a universal remote control designed to operate a wide range of LCD/LED smart TVs, including major brands like . It is often sold under brands like

Elias leaned closer to the glass viewing port. Inside the chamber, a violet light was scanning the ruined pages. The water damage began to evaporate, rising as a silver mist. The charred edges were knitting together, the carbon reversing, weaving back into paper.

For more specific brand compatibility, you can check retailers like AliExpress Must remain unobstructed to send and receive commands

Once the batteries are installed, the remote is ready to be programmed.

| Interval | Action | |----------|--------| | Monthly | Visual inspection for discoloration or burning | | Quarterly | Torque check on all power terminals | | Biannually | Contact resistance test (<100 mΩ) | | Annually | Replace if used in high-cycle applications (>100,000 ops) |

Happy viewing – and enjoy having your TV control back!

and the Brand Button (e.g., Number 1 for Samsung, 2 for LG, etc.) simultaneously.