Adjustment Program Epson 1390 Resetter Fixed Page

Scroll down the list to the Maintenance section, select , and click OK . Step 5: Check and Initialize the Counter Look for the check box labeled Main pad counter .

for the 1390 adjustment program or a tutorial on installing an external ink bottle

The (often called a "resetter" or "service utility") is a proprietary software tool originally created for Epson authorized service centers. It is not available on Epson's official website for end-users. However, it has been leaked, shared, and perfected by the DIY printer community over the last decade.

You can remove the waste ink pads, wash them, dry them thoroughly, and replace them, or buy new pads. Troubleshooting the Resetter adjustment program epson 1390 resetter fixed

This is a built-in safety feature, but you do not need to buy a new printer or pay for expensive service centers. You can fix this issue yourself using the official .

It says “service life ended.” But in reality, the pad is rarely full. Epson simply wants you to pay an authorized service center $100+ to run a software reset and (sometimes) replace the pad. If you don’t know about the adjustment program , you throw your printer away.

Resetting the software does not physically clean the ink pads. If you reset the counter multiple times without addressing the hardware, ink will eventually overflow and damage the printer's internal circuits. Scroll down the list to the Maintenance section,

Alternating flashing red lights on the paper and ink buttons.

Ensure USB is connected properly, the printer is on, and the computer date is correctly set to October 4, 2007 1.2.1.

Change the port settings in the "Select" menu from "Auto Selection" to the exact USB port assigned to the 1390. Ensure no other printing applications are running in the background. Application Crash or Access Violation It is not available on Epson's official website

In the menu, find and select and click OK 1.2.1.

Set the Port selection to the specific USB port where your printer is connected (e.g., USB001 (Stylus Photo 1390) ). Click . Step 2: Access the Maintenance Menu

: You download the Epson SP 1390 adjustment program and extract the files. Some older versions require you to manually set your computer’s system date (often to October 4, 2007 ) for the software to run correctly.

The Adjustment Program connects directly to your Epson 1390’s EEPROM (memory chip). It allows you to:

Right-click AdjProg.exe , go to Properties > Compatibility , check "Run this program in compatibility mode for," and select Windows 7 or Windows XP (Service Pack 3) . Crucial Maintenance: Dealing with the Physical Ink Pads