The Intronics thermostat typically has a 0.5°C to 1°C hysteresis (swing). This means it will turn on when the temperature drops 0.5°C below your setpoint and turn off when it reaches the setpoint.
Refer to on-device prompts or the exact model manual for button sequences.
Ensure your thermostat isn't behind a curtain, in direct sunlight, or near a drafty door, as this will trick the sensor and lead to uneven heating. intronics digital room thermostat user guide
: Supports up to three fan speeds and sweep fan control (optional). System Protection
Phillips screwdriver, drill (if new holes needed), level. The Intronics thermostat typically has a 0
Programming allows the thermostat to adjust temperatures automatically based on your daily routine. Most models offer a 5+2 day schedule, separating weekdays from weekends. Setting Time and Day Press and hold the button for three seconds.
A: Most models have a backlight that turns on for 10 seconds after a button press. If it stays on, you may have a “continuous backlight” setting enabled. Turn it off in advanced menu (look for “BL” or “LIGHT”). Ensure your thermostat isn't behind a curtain, in
Connect the wires to the terminal block based on standard terminal labels:
Ultimate Intronics Digital Room Thermostat User Guide: Optimize Your Home Comfort
Depending on your Intronics model, you may have these additional features:
Electrical installation must be carried out by a qualified electrician or heating engineer.