These tools are often flagged by antivirus software (like Windows Defender) as false positives. It is recommended to run them in a virtual machine or disable your antivirus temporarily at your own risk. Installation & Configuration Steps Extract the Tool: Download and extract the FirstChip MPTools v1.0.5.2 (often found on specialized firmware sites like ) into a dedicated folder on your desktop. Run as Administrator: Right-click FirstChip_MpTool.exe and select Run as Administrator Detect the Drive:
This technical guide covers the installation and operation of . This specific utility serves as the definitive tool for flashing, restoring, and low-level formatting flash drives powered by FC1178 and FC1179 controller chips. Understanding FirstChip FC1178 and FC1179 Controllers
: Select Capacity Optimize to maximize space, or Speed Optimize if you require faster read/write performance.
: Includes a custom lock disk feature and real-time display of the current configuration name on the interface.
With the tool already open, insert the USB drive. The tool should detect it and display information in one of the port cells (Port 1, Port 2, etc.). firstchip fc1178 fc1179 mptools v1052 install
Even with correct configuration, issues can arise. Below are the most common error codes and their solutions.
Re-plug the drive after closing the MPTool. If still not visible, check Disk Management—the drive may need a new volume created (right-click → New Simple Volume).
Once the software interface is open, follow these steps to reflash your device:
Extract the file using WinRAR or 7-Zip to a dedicated folder on your local drive (e.g., C:\FirstChip_V1052\ ). Step 2: Launch the Executable These tools are often flagged by antivirus software
After configuring, click or Save to return to the main window.
The V1.0.5.2 version (released around June 2022) specifically supports the following FirstChip controller models:
Conclusion Installing FirstChip MPTools v1.0.52 for FC1178/FC1179 devices is a routine but detail-sensitive task that demands correct drivers, stable power, and careful attention to matching firmware to hardware. By following the preparatory checks, platform-specific steps, and troubleshooting guidance above, integrators can configure and maintain biometric modules reliably. For exact release notes, driver package contents, and recovery instructions, consult the vendor’s official documentation accompanying the v1.0.52 release.
: FC1178, FC1178Bc, FC1179, or FC1179Ab. 2. Disable Antivirus Software Run as Administrator: Right-click FirstChip_MpTool
Congratulations – you’ve successfully completed the firstchip fc1178 fc1179 mptools v1052 install process. Your USB drive is alive again.
This often indicates a hardware failure in the NAND chip or an incorrect firmware version. Ensure you are using the V1.0.5.2 version specifically if your chip was manufactured around late 2020.
Re-run the process with "Capacity Priority" and a higher Bin Setting value. If the true capacity is still reduced, the NAND flash has permanent bad blocks, and the reduced capacity is the safe maximum.