The HG680p does not always boot from USB automatically. You need to force it into upgrade or boot selection mode.
While holding the button, plug the power cable back into the box.
How to Install RealUnix Pro on the HG680P TV Box: A Complete Guide realunix pro hg680p install
This usually means the box failed to read the external media. Ensure your SD card is formatted correctly, or try switching from a USB 3.0 port to a USB 2.0 port.
: Use the Amlogic USB Burning Tool and appropriate drivers installed on a Windows PC. The HG680p does not always boot from USB automatically
When downloaded from reputable community sources, RealUnix Pro is generally safe. However, always scan downloaded files with antivirus software and only use firmware that has been tested and confirmed working by other HG680-P users.
: The tool should show a "Connect Success" status. Once it does, the flashing process begins automatically. How to Install RealUnix Pro on the HG680P
Once flashing is done, open the newly created boot partition on your USB/SD card (often labeled as BOOT or COWRY ). Look for a folder named dtb or dtb_files .
(Note: The exact command name may vary depending on the RealUnix sub-version, such as aml-install or install.sh ).
RealUnix Pro is a refined, optimized Linux-based operating system designed for Amlogic-powered TV boxes like the HG680P. Unlike standard Android, RealUnix Pro focuses on: