Navigate to the tab. Enter your Flash Part Number or select the specific NAND type matching your Flash ID.
Verify that the detected parameters match your drive profile. Click to begin the low-level flashing process.
If you own a corrupted USB flash drive that uses a Phison controller, you have likely come across the terms , PS2251 , and FlashBoot Repack . When a USB drive becomes write-protected, shows "no media," or refuses to format, it usually means the controller firmware is corrupted. phison mpall v3720b ps2251 flashboot repack
: You selected the wrong BN.bin or FW.bin file pair, or your specific NAND memory type is unsupported by the version of firmware in your repack folder.
Phison production tools interact with hardware at a low level. To avoid communication interruptions during the flashing process, prepare your environment: Navigate to the tab
Click the button on the right side of the user interface. Your USB drive should appear in one of the numbered grid boxes.
: While version v3.72.0B is widely used, it is specifically compatible with certain PS2251 controller versions (such as PS2251-03, PS2251-67, etc.). Standard Repair Procedure Click to begin the low-level flashing process
Before opening MPALL, you must verify your exact hardware configuration.
Before starting, back up all important data, as this process will completely erase all information on the target USB drive.
Extract the downloaded RAR/ZIP file to a directory with a simple path, for example, C:\MPALL\ . Do not use long paths or special characters. 2. Prepare the Configuration (MPParamEdit)
The repack includes an executable named MPParamEdit_F1.exe . This tool generates the configuration profile ( MP.ini ) that instructs MPALL how to flash your specific chip. Open . Select Advance Setting and click New .
