Rigger Level 3 Aramco Notes

Approximately 2,400 kg/m³ (or 150 lbs/ft³). Formula: Safe Working Load (SWL) Rule of Thumb

Always use a tagline to control the load, especially during high winds. C. Signaling Only one rigger should give signals to the crane operator.

Aramco requires a Level 3 rigger to personally inspect before every shift. The notes contain a checklist: welds, gate latches, fall arrest anchor points (5000 lbs rating), and the anti-rotation device on the crane hook.

: Take 3 seconds to inspect equipment, keep a 3-meter distance from suspended loads, and never stand beneath a load. rigger level 3 aramco notes

Any lift that meets one of the following criteria is designated a and requires a third-party witness:

: Familiarity with the Saudi Aramco Rigging Handbook and safety procedures such as the 3-3-3 Rule (3 seconds to inspect, 3 meters distance from loads).

Standard capacity rating for a personal fall arrest system is 2260kg (5000 pounds) . 2. Safety Clearances & Dimensions Approximately 2,400 kg/m³ (or 150 lbs/ft³)

Aramco lifting operations are governed by a set of rigorous General Instructions. As a Level 3 rigger, :

For any critical lifts requiring Level 3 supervision, please contact directly.

: Mastering hand and radio signals used to communicate with crane operators. Signaling Only one rigger should give signals to

Some key concepts and best practices outlined in the Rigger Level 3 Aramco Notes include:

Explicitly check the expiration date on the crane inspection sticker and the rigging hardware tags.

Arm extended horizontally, fingers closed, thumb pointing upward.